MN4014 Multirotor Fixed Wing UAV Motor KV330
€96.90
T-MOTOR MN4014 MN Navigator UAV motor. Review the verified variants and full technical specifications before selection.
55 in stock
Description
MN4014 UAV Motor
The T-MOTOR MN4014 is a professional UAV motor for aircraft builders selecting a power unit from the MN Navigator range. Available configurations include Parameter KV330, Parameter KV400; choose the version that matches your propulsion system. The specification data below is retained exactly so you can verify electrical, mechanical and propeller compatibility before ordering.
Use this MN4014 UAV motor for a new airframe or a matched replacement where the listed dimensions, voltage and load figures meet the project requirements. For best results, pair the T-MOTOR MN4014 with the recommended ESC, propeller and battery values shown in the technical tables.
Detail Information







Specifications
| Test Item | MN4014 KV330 | Report NO. | MN.00026 |
| Internal Resistance | 85mΩ | Configuration | 18N24P |
| Shaft Diameter | 4mm | Motor Dimensions | Φ44.7×34.5mm |
| Stator Diameter | 40mm | Stator Height | 14mm |
| AWG | 18# | Cable Length | 600mm |
| Weight Including Cables | 171g | Weight Excluding Cables | 150g |
| No.of Cells(Lipo) | 4-8S | Idle Current@10v | 1.1A |
| Max Power (180S) | 750W | Max Continuous Current 180S | 25A |
| Test Item | MN4014 KV400 | Report NO. | MN.00025 |
| Internal Resistance | 67mΩ | Configuration | 18N24P |
| Shaft Diameter | 4mm | Motor Dimensions | Φ44.7×34.5mm |
| Stator Diameter | 40mm | Stator Height | 14mm |
| AWG | 18# | Cable Length | 600mm |
| Weight Including Cables | 171g | Weight Excluding Cables | 150g |
| No.of Cells(Lipo) | 4-8S | Idle Current@10v | 1.3A |
| Max Power (180S) | 900W | Max Continuous Current 180S | 30A |
| Item No. | Voltage (V) | Prop | Throttle | Current (A) | Power (W) | Thrust (G) | RPM | Efficiency (G/W) | Operating Temperature (℃) |
| MN4014 KV330 | 22.2 | T-MOTOR 15*5CF | 50% | 3.6 | 79.92 | 830 | 3900 | 10.39 | 45 |
| 65% | 5.9 | 130.98 | 1150 | 4600 | 8.78 | ||||
| 75% | 7.8 | 173.16 | 1430 | 5100 | 8.26 | ||||
| 85% | 10.1 | 224.22 | 1690 | 5600 | 7.54 | ||||
| 100% | 11.9 | 264.18 | 1920 | 6000 | 7.27 | ||||
| T-MOTOR 16*5.4CF | 50% | 4.3 | 95.46 | 950 | 3700 | 9.95 | 50 | ||
| 65% | 7 | 155.40 | 1420 | 4400 | 9.14 | ||||
| 75% | 9.6 | 213.12 | 1750 | 4900 | 8.21 | ||||
| 85% | 12.5 | 277.50 | 2060 | 5400 | 7.42 | ||||
| 100% | 14.7 | 326.34 | 2390 | 5600 | 7.32 | ||||
| T-MOTOR 17*5.8CF | 50% | 4.7 | 104.34 | 1050 | 3400 | 10.06 | 55 | ||
| 65% | 8 | 177.60 | 1580 | 4100 | 8.90 | ||||
| 75% | 10.7 | 237.54 | 1970 | 4600 | 8.29 | ||||
| 85% | 14.4 | 319.68 | 2300 | 5100 | 7.19 | ||||
| 100% | 17 | 377.40 | 2600 | 5400 | 6.89 | ||||
| Notes:The test condition of temperature is motor surface temperature at 100% throttle while the motor run 10min. | |||||||||
| MN4014 KV400 | 22.2 | T-MOTOR 15*5CF | 50% | 5.7 | 126.54 | 1250 | 4500 | 9.88 | 46 |
| 65% | 9.1 | 202.02 | 1630 | 5200 | 8.07 | ||||
| 75% | 12 | 266.40 | 1950 | 5800 | 7.32 | ||||
| 85% | 15.8 | 350.76 | 2370 | 6400 | 6.76 | ||||
| 100% | 18.7 | 415.14 | 2620 | 6700 | 6.31 | ||||
| T-MOTOR 16*5.4CF | 50% | 6.4 | 142.08 | 1410 | 4200 | 9.92 | 53 | ||
| 65% | 11 | 244.20 | 1920 | 5000 | 7.86 | ||||
| 75% | 14.6 | 324.12 | 2380 | 5500 | 7.34 | ||||
| 85% | 19.1 | 424.02 | 2790 | 6100 | 6.58 | ||||
| 100% | 22.5 | 499.50 | 3020 | 6300 | 6.05 | ||||
| T-MOTOR 17*5.8CF | 50% | 7.6 | 168.72 | 1530 | 4000 | 9.07 | 67 | ||
| 65% | 12.8 | 284.16 | 2180 | 4800 | 7.67 | ||||
| 75% | 16.7 | 370.74 | 2550 | 5250 | 6.88 | ||||
| 85% | 2.17 | 48.17 | 3110 | 5700 | 64.56 | ||||
| 100% | 25.7 | 570.54 | 3360 | 6000 | 5.89 | ||||
| Notes:The test condition of temperature is motor surface temperature at 100% throttle while the motor run 10min. | |||||||||





