TATTU Neo G300 30000/60000mAh 12S/18S Smart Battery
$605.00 $1,596.00Price range: $605.00 through $1,596.00
TATTU Neo G300 smart battery family: 30000mAh 12S1P hard-plug and 60000mAh 18S2P QS9S-F packs with 5C discharge, 4.2V 811-series semi-solid cells and a 3.2V cut-off for heavy-lift cargo drones.
Description
TATTU Neo G300 Smart Battery for Heavy-Lift Cargo Drones
The TATTU Neo G300 is a 4.2V smart battery family built on 811-series semi-solid cells rated at 280-300Wh/kg. It is offered in two formats for heavy-lift work: a 30000mAh 12S1P pack on a hard plug, and a 60000mAh 18S2P pack in a hard shell with flying leads and a QS9S-F connector. Both packs run 5C continuous discharge and report live pack data to the flight controller.
Configurations in this listing
| Configuration | Model | Charge voltage | Dimensions (L x W x H) | Weight | Connector |
|---|---|---|---|---|---|
| 30000mAh 44.4V 12S1P | TANEO30K12S5 | 50.4V | 28.58 x 16.36 x 9.85 cm | 5.98 kg | 8-pin hard plug (Prolanv PDC1810F0002) |
| 60000mAh 66.6V 18S2P | TANEO60K18S5Q9 | 75.6V | 25.4 x 24.2 x 18.3 cm | 16.4 kg | QS9S-F |
Key features
- 811-series semi-solid cells at 280-300Wh/kg in a 4.2V system with a 3.2V cut-off setting.
- 5C continuous discharge for long-endurance heavy-lift missions.
- Hard-shell case with a load-bearing handle; the 18S2P pack uses flying leads.
- Direct hard plug on the 30000mAh pack, QS9S-F on the 60000mAh pack.
- Smart electronics report pack voltage, current and temperature in real time.
Charging and compatibility
Charge the 12S1P pack to 50.4V and the 18S2P pack to 75.6V, with a cut-off of 3.2V per cell. The 12S1P pack suits the TATTU TA1500 or TA3200 dual-channel chargers; the 18S2P pack needs a high-current charger such as the TA3000 PLUS.
Applications
Heavy-lift cargo and logistics drones, agricultural spreading platforms, emergency response aircraft, and inspection or patrol missions that need 12S or 18S packs with a high payload margin.
Handling and safety
- Store the pack in a dry place at room temperature, away from direct sunlight and sharp objects.
- Never charge unattended, and always charge on a non-flammable surface.
- Check cell balance, connector condition and cable insulation before every flight.
- Do not puncture, crush, short-circuit or immerse the pack; keep the connector capped when not in use.
FAQ
Why does the 60000mAh pack use 18S2P instead of 12S?
The 18S2P layout keeps current per cell lower at the same power, which reduces heat in the pack and cabling during long heavy-lift flights.
Which charger is required for the 60000mAh version?
Use a charger rated for 18S packs and 75.6V charge voltage, such as the TA3000 PLUS or TA3000 PRO.
What cut-off voltage should I set?
Set the charger cut-off to 3.2V per cell for this 4.2V chemistry.



Reviews
There are no reviews yet.